print

Abstract

The purpose of this investigation was to determine residual monomers, the insoluble gel fraction, and singly reacted dimethacrylate monomers in heat-polymerized, auto-polymerized conventional and pour-type denture base materials. Residual monomers were determined by HPLC analysis of tetrahydrofuran extracts of denture base polymers. The gel fraction was determined by gravimetric analysis of the nonextractable portion. The pendant methacrylate groups in the gel fraction were determined by quantitative IR (infrared) spectrometry. It was demonstrated that the heat-polymerized materials had the lowest content of residual monomers. Generally, the content of pendant methacrylate groups in the gel was dependent on the initial quantity of crosslinking agent in the monomer liquids. The gel fractions of the heat-polymerized materials were larger than the quantity of reacted monomers and were also dependent on the quantity of crosslinking agent. These findings showed that some of the linear prepolymer, poly(methyl methacrylate) (PMMA), had been incorporated into the crosslinked polymer system. The gel fraction of the auto-polymerized pour-type materials corresponded to the quantity of reacted monomers, whereas the conventional auto-polymerized materials took an intermediate position between pour type materials and heat-polymerized materials in this respect.


Reference
Conversion in denture base polymers.
Ruyter IE, Øysæd H.
J Biomed Mater Res. 1982 Sep; 16(5): 741-754.