A novel etching technique for surface treatment of zirconia ceramics to improve adhesion of resin-based luting cements April 19th 2017
Biological and physicochemical properties of carbon-graphite fibre-reinforced polymers intended for implant suprastructures July 22nd 2011
Adhesion properties in systems of laminated pigmented polymers, carbon–graphite fiber composite framework and titanium surfaces in implant suprastructures October 7th 2009
Effect of thermal cycling on flexural properties of carbon-graphite fiber-reinforced polymers August 7th 2009
Comparison of Different Etching Agents and Repair Materials Used on Feldspathic Porcelain June 7th 2009
Influence of thermal cycling on flexural properties of composites reinforced with unidirectional silica-glass fibers. September 12th 2008
Wettability, water sorption and water solubility of seven silicone elastomers used for maxillofacial prostheses. June 20th 2008
A prospective study on the clinical performance of polysiloxane soft liners: one-year results. June 11th 2008
Bacterial penetration along different root canal filling materials in the presence or absence of smear layer February 11th 2008
Bond strength between a silica glass-fiber-reinforced composite and artificial polymer teeth. November 11th 2007
Mechanical and physical properties of carbon-graphite fiber-reinforced polymers intended for implant suprastructures. October 14th 2007
Effect of thermal cycling on composites reinforced with two differently sized silica-glass fibers October 1st 2007
Evaluation of adhesion of chairside hard relining materials to denture base polymers. December 12th 2005
Fråga NIOM: Fiberarmerade protetiska material. Vad kan vi göra i dag og vilka möjligheter kommer att finnas i framtiden? November 5th 2005
Physicochemical evaluation of silica-glass fiber reinforced polymers for prosthodontic applications June 10th 2005
Survival of Enterococcus faecalis in infected dentinal tubules after root canal filling with different root canal sealers in vitro. April 13th 2004
Resistance of medical gloves to permeation by methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDMA), and 1,4-butanediol dimethacrylate (1,4-BDMA). December 13th 2003
Adhesion of endodontic sealers: scanning electron microscopy and energy dispersive spectroscopy. October 13th 2003
Permeability of Medical Gloves to Mono- and Dimethacrylate Monomers in Dental Restorative Materials September 13th 2002
Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment. December 12th 2001
Changes in appearance of silicone elastomers for maxillofacial prostheses as a result of aging December 20th 1999
Effect of water storage on the flexural properties of E-glass and silica fiber acrylic resin composite. August 26th 1998
Effect of polymerization temperature and time on the residual monomer content of denture base polymers. March 28th 1998
Quantitative determination of type A and type B carbonate in human deciduous and permanent enamel by means of Fourier transform infrared spectrometry. December 2nd 1997
The swelling phenomenon of acrylic resin polymer teeth at the interface with denture base polymers. September 19th 1997
How different curing methods affect mechanical properties of composites for inlays when tested in dry and wet conditions. September 18th 1997
The effects of polymerization temperature on the acrylic resin denture base-tooth bond March 4th 1997
Evidence for induction of cardiorespiratory and vascular complications by methylmethacrylate monomer in hip replacement surgery. Laboratory and animal investigations February 3rd 1997
Cyclopolymerization of Dodecanidiol Dimethacrylate and Identification of Polymer Structure July 3rd 1995
How different curing methods affect the degree of conversion of resin-based inlay/onlay materials July 3rd 1994
Chemical, physical, and histologic studies on four commercial apatites used for alveolar ridge augmentation September 3rd 1992
An evaluation of the radiopacity of composite restorative materials used in Class I and Class II cavities December 15th 1989
Creep and recovery of composites for use in posterior teeth during static and dynamic compression July 1st 1988
Carbon/graphite fiber reinforced poly(methyl methacrylate): properties under dry and wet conditions. September 21st 1987
Water sorption and filler characteristics of composites for use in posterior teeth. November 26th 1986
Development of carbon/graphite fiber reinforced poly (methyl methacrylate) suitable for implant-fixed dental bridges. February 25th 1986
Composites for use in posterior teeth: mechanical properties tested under dry and wet conditions February 25th 1986
Implant-fixed, dental bridges from carbon/graphite fibre reinforced poly (methyl methacrylate) January 25th 1986
The influence of various admixes on the physical properties of a polycarboxylate cement. August 26th 1983
Identification of methacrylates and acrylates in dental materials by mass spectrometry March 26th 1983
Conversion in different depths of ultraviolet and visible light activated composite materials. October 26th 1982