NIOM – Fortyfive years of Nordic dentistry -

NIOM’s purpose is to ensure that the dental materials and products, used in dental care in the Nordic countries, meet the health and technical requirements which are in place regarding development in the area.

How do resin composites perform in the long run? -

Restorative dental treatment still lays claim to a large proportion of dentists’ working day. After the phase-out of amalgam as a restorative material, composite resin has become the dominating material of choice among dentists.

Composite restorative materials – basic properties -

Abstract In this article we are looking at the development of composite restorative materials. We discuss the composition of the resin matrix, and describe the introduction of some new monomers. We also comment on the development of fillers. Some materials are discussed in more detail. Bulk-fill materials do not seem to be essentially different to […]

Endodontic materials – irrigants, sealers, and obturating materials -

The root canal filling concludes the classical triad in endodontic treatment: biomechanical instrumentation, disinfection and obturation. The purpose of the root canal filling is to prevent penetration of bacteria into the root canal and to prevent access of nutrients and growth of residual bacteria.

Dental ceramics – Classification and properties -

Different dental ceramics available today including a classification, mechanical properties and a description of processing techniques with emphasis on the zirconia materials.

Base metal alloys for fixed prosthodontics -

Cobalt-chromium alloys are now commonly used for fixed dentures and single crowns. The alloys are attractive because they are light and provide high stiffness due to their high elastic modulus (Young’s modulus) compared with noble metal alloys, pure titanium or titanium alloys.

The influence of dental loupes on the ocular hazard. -

Abstract The use of dental and surgical loupes is increasing in odontology and medicine. During dental treatments this use is often combined with bright blue light sources such as from dental material curing lights and/or lights attached to the loupes. By the aid of an experimental model we investigated whether the time to reach the […]

Dentale restaureringsmaterialer: Biologiske egenskaper og deres kliniske konsekvenser -

Tandrestaureringsmaterialer indeholder en mængde forskellige stoffer med ulige biologiske egenskaber. I mundhulen udsættes materialerne for både mekaniske, kemiske, mikrobielle og enzymatiske påvirkninger, og substanser kan frigives fra materialerne

Internal fit of single crowns produced by CAD/CAM and lost-wax metal casting technique assessed by the triple-scan protocol -

Whether single crowns produced by computer-aided design and computer-aided manufacturing (CAD-CAM) have an internal fit comparable to crowns made by lost-wax metal casting technique is unknown.

Degree of conversion and leached monomers of urethane dimethacrylate-hydroxypropyl methacrylate-based dental resin systems. -

The degree of conversion (DC) and monomer leaching of three experimental urethane dimethacrylate (UEDMA)-hydroxypropyl methacrylate (HPMA)-based resin systems were studied.

Are probiotics relevant for oral health? -

Mange forskere hevder at regelmessig tilførsel av probiotika også kan ha en hemmende effekt på kariesutvikling og periodontal patologi ved at tilførte bakterier konkurrerer med patogener både med hensyn til adhesjon, næringsstoffer og vekstfaktorer

Antibacterial and Antibiofilm Effect of Low Viscosity Chitosan against Stapylococcus epidermides -

The aim of this study was to investigate the antibacterial and antibiofilm properties of low viscosity chitosan on S. epidermidis growth and biofilm formation.

Repair of defective composite restorations. A questionnaire study among dentists in the Public Dental Service in Norway -

This study aimed to investigate dentists’ treatment choices concerning “repair or replacement” of defective restorations.

Treatment decisions on Molar-Incisor Hypomineralization (MIH) by Norwegian dentists – a questionnaire study -

The study aimed to explore the variability between the treatment decisions dentists make for MIH-affected teeth.

Anti-biofilm Effect of Methacrylated Chitosan Incorporated Denture Base Resin -

Abstract Objectives Chitosan is a carbohydrate polymer derived from chitin with a reported antimicrobial effect against bacteria. The present study aimed to investigate the biofilm inhibitory effect of methacrylated chitosan covalently incorporated into the polymethylmethacrylate polymeric network of a denture base resin. Methods Methacrylated chitosan was synthesized by reacting low molecular weight (LMW) chitosan with […]

Thiophenone Attenuates Enteropathogenic Escherichia coli O103:H2 Virulence by Interfering with AI-2Signaling -

Interference with bacterial quorum sensing communication provides an anti-virulence strategy to control pathogenic bacteria.

Physicochemical characterisation and antimicrobial phototoxicity of an anionic porphyrin in natural deep eutectic solvents -

The purpose of this study was to investigate preparations of an anionic porphyrin, meso-tetra-(4-carboxyphenyl)-porphine (TCPP), solubilised in NADES, with regard to their physicochemical and antibacterial properties.

Morphological and mechanical characterization of composite bone cement containing polymethylmethacrylate matrix functionalized with trimethoxysilyl and bioactive glass -

Abstract Medical polymers of biostable nature (e.g. polymethylmetacrylate, PMMA) are widely used in various clinical applications. In this study, novel PMMA-based composite bone cement was prepared. Bioactive glass (BAG) particulate filler (30 wt%) was added to enhance potentially the integration of bone to the cement. The polymer matrix was functionalized with trimethoxysilyl to achieve an interfacial […]

Wavelength dependent increase in cell sensitivity after glutathione inhibition by methacrylate monomers. -

Reduction in the amount of glutathione (GSH) in cells can lead to increased sensitivity to physical and chemical agents. Methacrylate monomers (MM) are precursors of polymethacrylates which are used in dental and medical biomaterials and in a wide variety of other products. MM can increase cell sensitivity to long wavelength ultraviolet and visible radiation. The aim of this study is to elucidate if MM can induce sensitivity also to shorter wavelength radiation.

The Dental Curing Light: A Potential Health Risk -

Powerful blue-light emitting dental curing lights are used in dental offices to photocure resins in the mouth. In addition, many dental personnel use magnification loupes.

Oral health and congitive function -

Experiments using radial arm mazes show that mice and rats have difficulties finding food when their chewing capability is disturbed after molar extraction. Observations of this kind have indicated an association between mastication and cognition. Experimental evidence show increased blood stream and neuronal activity in young individuals using chewing gum. Some experiments also indicate that […]

Proteome Changes Indicate Oxidative Stress and Protein Damage after Methacrylate Exposure in Human Monocyte Cell Line -

It has been suggested that reactive oxygen species are involved in HEMA toxicity. The upregulated levels of antioxidant enzymes and Hsp70 family proteins showed that HEMA exposure lead to cellular stress at concentrations that had no effect on cell viability.

The Post-Amalgam Era: Norwegian Dentists’ Experiences with Composite Resins and Repair of Defective Amalgam Restorations -

Amalgam was banned as a dental restorative material in Norway in 2008 due to environmental considerations. An electronic questionnaire was sent to all dentists in the member register of the Norwegian Dental Association (NTF) one year later, to evaluate dentists’ satisfaction with alternative restorative materials and to explore dentists’ treatment choices of fractured amalgam restorations.

Phototherapy with sunlight for treatment of neonatal jaundice in low-income countries -

Abstract Neonatal jaundice, or hyperbilirubinemia, is a relatively common condition, and occurs in 2 out of 3 newborns. The condition is often transient. However, untreated hyperbilirubinemia can cause kernicterus and nervous system damage. Worldwide, over 114 000 infants die and 65 000 infants grow up with permanent brain damage due to this condition [1]. A […]

Hyperspectral fluorescence characterisation of bacteria. -

Some strains of bacteria are known to fluoresce when exposed to UV-light, and are therefore detectable using spectroscopy techniques. If we could differentiate bacteria only based on an image, we open for a range of new methods within the field of microbial diagnostics. This is the underlying idea for our project. As we acquire hyperspectral images of a series of different bacteria, we aim to map their spectral “fingerprint” in a spatial manner. These first investigations make up a feasibility study which is continued this spring to allow for a more complete study.

Comprehensive Transcriptome Profiles of Streptococcus mutans UA159 Map Core Streptococcal Competence Genes -

In Streptococcus mutans, an oral colonizer associated with dental caries, development of competence for natural genetic transformation is triggered by either of two types of peptide pheromones, competence-stimulating

Effect of Components in Resin-Based Dental Restoratives on Protein-S-Glutathionylation -

Protein S-glutathionylation (PSSG) is the reversible formation of mixed disulfides between glutathione and protein cysteinyl residues.

Exposure to Dental Monomer Hydroxyethyl Methacrylate (HEMA) Induces Increased Transcription of Genes Involved in Oxidative Stress Responses -

Polymer-based restorative materials are widely used in dentistry. Cured materials contain unpolymerized methacrylate monomers which leak into the oral environment.

Effekter i munnhulen ved bruk av snus -

Snus is a smokeless, ground tobacco product, which is most commonly placed in the mouth between the gum and lip. Like other tobacco products, snus contains the biologically active and addictive substance, nicotine.

Occlusal Caries Management: Preferences among Dentists in Norway -

The aim was to measure variations in the threshold for operative treatment of occlusal caries in permanent teeth and the use of dental materials, compared with results from a similar study conducted in Norway in 1995.

The safety of the use of bisphenol A in medical devices -

The European Commission’s independent Scientific Committee on Emerging and Newly Identified Health Risks (SCENIHR) recently published its risk assessment of exposure to BPA via medical devices that are manufactured with materials that potentially leach BPA leading to oral (via dental material), subcutaneous and intravenous (e.g. during hemodialysis) routes of exposure.

Posterior composites and new caries on adjacent surfaces – any association? Longitudinal study with a split-mouth design -

The aim of this longitudinal study was to compare caries incidence in sound approximal surfaces adjacent to newly placed composite restorations with the caries incidence in corresponding surfaces in contralateral teeth without any restorations in contact; and to assess risk factors for dentine caries development on adjacent and control surfaces.

The safety of dental amalgam and alternative dental restoration materials for patients and users -

The European Commission asked its independent Scientific Committee on Emerging and Newly Identified Health Risks (SCENIHR) to provide a risk assessment on dental amalgam and alternatives such as resin-based composites, glass ionomer cements, ceramics and gold alloys to update the SCENIHR’s 2008 Opinion in light of new developments and data.

Load at fracture of monolithic and bilayered zirconia crowns with and without a cervical zirconia collar -

The effect of anatomic contour design in all or parts of zirconia crowns is uncertain regarding clinical reliability and survival rates.

Toxicity of plast materials -

The term «resin-based dental materials» refers to dental materials containing polymers. Usually, these polymers are formed by in situ polymerization of methacrylate monomers.