Casting of Ti-6Al-4V alloy compared with pure Ti in an Ar-arc casting machine -

Dental prostheses of Ti are normally cast in pure Ti. Some appliances, however, require higher yield strength. Casting of Ti alloys is of interest in such cases. The objective of the present work was to study the quality of castings made of Ti-6Al-4V compared with those made of pure Ti.

Cyclopolymerization of Dodecanidiol Dimethacrylate and Identification of Polymer Structure -

Dimethacrylate (DMA) and its polymer have been proven to be very useful in a wide variety of biomedical
applications and microelectronics research. However, its strong polymerization shrinkage may introduce trouble for the application of a direct filling material.

Fracture toughness and flexural strength of dental ceramics for titanium -

Three brands of dental ceramics for veneering to titanium: TitanBond (O’Hara), Ti-Ceram (Ducera) and Titankeramik (Vita) were tested to compare their fracture properties in wet and in dry conditions.

Mold filling of Ti castings using investments with different gas permeability -

The aim of this work was to study mold filling during casting of standardized five-unit Ti bridges vs. the gas permeability of the investments.